And 'customary for jewelry manufacturers will need to use the tools, skills. Integral skill that must be done by the creators of jewelry is owned by the welder to weld jewelry.
Some people believe that it is safer to melt, and replace the jewelry with the iron. You will also find it easier to attach the jewels with this tool, as with a blowtorch. But to do this, you need technology that is aware of the old welding torch. You also have to payBe careful in the choice of the metal. Iron can only be used on base metals such as tin or copper.
Before doing so, you need some tools like a welder, welding, welding of the tape, metal jewelry can be welded and welding blocks to prepare.
The first thing to do is that the two pieces of metal together. If you do it right, the parties will sit flush against each other. You must ensure that the gap is as thin as possible. Then you mustneed to rewind the tape on the surface of the piece, which is the site of metal. You can put it on the glass, for example, they're pieces of molten metal.
Do not forget to heat the iron, while doing so. Once it warms up, you can use the tip of the instrument to the desired area, touch second to register. Press the tip a little 'vacuum in which the two parts together. You have to heat the tip of the soldering iron can flow across the gap. After the fact, notForget the cool. Do not touch it with bare hands. Let cool to room temperature.
0 comments:
Post a Comment